Abrasive Saws, Straight & Miter, Manual & Power Feed

ALLIED AME - BERTSCH - BROBO - BURR-KING - CARELL - CLAUSING - CLEVELAND - COLLINS - DAKE - DURA-BORE - EAGLE - ERCOLINA - EVERETT - EVOLUTION - FALLS - FICEP - HECK - HOSSFIELD - HYD-MECH - IKS - JANCY - KALAMAZAOO - KAMA - KOIKE - ARONSON - LENOX - MEP - NATIONAL - NITTO-KOHKI - PERFECTION - PIRANHA - SCOTCHMAN - SLUGGER - STANDARD - TRUMPF - WA WHITNEY - WYNN'S

Abrasive Coldsaws

	Dry Abrasive Cut-Off Machines are available in a range of sizes from 8" to 26" wheel diameters. We offer hydraulic power head and wheel wear compensator models to improve cutting productivity for the 14" - 16" size range of an abrasive cut-off. For a smoother, faster cut, oscillation is available on our 20" (optional) and standard on the 26" models. Some manufacturers use this dry abrasive cut-off machine to cut; golf clubs, food preparation equipment and railroad tracks.

	Dry Mitering Cut-off Machines are available in a range of sizes from 10" to 20"-22" wheel diameters. Mitering Cutting Head can swivel 45° left of center. Double Mitering Cut-off Machines swing left and right. Note that the work piece capacity when mitering is less than when using the same machine for a straight (90°) cut. Then click on the size that’s right for your application.

	Dry Double Mitering Cut-off Machines are available in a range of sizes from 14"-16" to 26" wheel diameters. Mitering Cutting Head can swivel 45° left of center. Double Mitering Cut-off Machines swing left and right. Note that the work piece capacity when mitering is less than when using the same machine for a straight (90°) cut. Then click on the size that’s right for your application.

	Wet Abrasive Cut-Off Machines are available in a range of sizes from 10" to 26" wheel diameters. We offer hydraulic power head and wheel wear compensator models to improve cutting productivity for the 14" - 16" size range of an abrasive cut-off. For a smoother, faster cut, oscillation is available on our 20" (optional) and standard on the 26" models. Some manufacturers use this wet abrasive cut-off machine to cut; cylinder rods, linear bearings and drill bits and use for metallurgical testing.