Home Special Offers Reference Good Ideas Leasing Info Request About Us Directions

ALLIED AME - BERTSCH - BROBO - BURR-KING - CARELL - CLAUSING - CLEVELAND - COLLINS - DAKE - DURA-BORE - EAGLE - ERCOLINA - EVERETT - EVOLUTION - FALLS - FICEP - HECK - HOSSFIELD - HYD-MECH - IKS - JANCY - KALAMAZAOO - KAMA - KOIKE - ARONSON - LENOX - MEP - NATIONAL - NITTO-KOHKI - PERFECTION - PIRANHA - SCOTCHMAN - SLUGGER - STANDARD - TRUMPF - WA WHITNEY - WYNN'S

 

 

Home
Up
Material Handling
Sawing Machines
Drilling Machines
Ironworkers
Shears & Notchers
Press Brakes
Presses
Thermal Cutting
Plate Rolls
Benders & Shape Roll
Pipe & Tube Notcher
Bevel, Grind, Debur, Vibratory
Threading Machines
Welding Positioners
Material Handling
Cutters,Bits,& Coolant

                      Pivot Coldsaws             

                     

CPO 275

  • Manual Double Self-Centering Vise Assures Burr-Free Cuts
  • Operator Controlled Trigger Switch
  • Miter Capabilities 135 degrees, 90 degrees Left and 45 degrees Right
  • Miter Locking Device stops at 45 Degrees Left, Straight 90 Degrees, and 45 Degrees Right
  • Capable of Slotting
  • Two Cutting Speeds
  • Hardened and Ground Worm and Wheel Gear Box
  • Worm Wheel of Top Quality Bronze
  • 7 Gallon Coolant Tank with Pump
  • 30" Material Length Stop
  • One 10" Diameter (250 mm) HSS Blade
  • One Blade Wrench
  • One Gallon Concentrated Coolant
  • 230 or 460 Volt/3 Phase Electrics (must specify voltage)
  • Warranty: One Year Parts
  • Made in USA
More Specs

Tooling


CPO 275 PK

  • Power Double Self-Centering Vise Assures Burr-Free Cuts
  • Operator Controlled Trigger Switch
  • Miter Capabilities 135 degrees, 90 degrees Left and 45 degrees Right
  • Capable of Slotting
  • Two Cutting Speeds
  • Hardened and Ground Worm and Wheel Gear Box
  • Worm Wheel of Top Quality Bronze
  • 7 Gallon Coolant Tank with Pump
  • 30" Material Length Stop
  • One 10" Diameter (250 mm) HSS Blade
  • One Blade Wrench
  • One Gallon Concentrated Coolant
  • 230 or 460 Volt/3 Phase Electrics (must specify voltage)
  • Warranty: One Year Parts
  • Made in USA
More Specs

Tooling


CPO 275 PKPD

  • Semi-Automatic Cycle
  • Pneumatic Power Down Feed with Electric Controls
  • Separate Feed Control of both Feed Rate and Feed Pressure
  • Power Double Self-Centering Vise Assures Burr-Free Cuts
  • Emergency Stop Button
  • Miter Capabilities 135 degrees, 90 degrees Left and 45 degrees Right
  • Capable of Slotting
  • Two Cutting Speeds
  • Hardened and Ground Worm and Wheel Gear Box
  • Worm Wheel of Top Quality Bronze
  • 7 Gallon Coolant Tank with Pump
  • 30" Material Length Stop
  • One 10" Diameter (250 mm) HSS Blade
  • One Blade Wrench
  • One Gallon Concentrated Coolant
  • 230 or 460 Volt/3 Phase Electrics (must specify voltage)
  • Warranty: One Year Parts
  • Made in USA
More Specs

Tooling


CPO 350

  • Manual Double Self-Centering Vise Assures Burr-Free Cuts
  • Operator Controlled Trigger Switch
  • Miter Capabilities 135 degrees, 90 degrees Left and 45 degrees Right
  • Miter Locking Device Stops at 45 degrees Left, Straight 90 degrees, and 45 degrees Right
  • Capable of Slotting
  • Two Cutting Speeds
  • Double Reduction, Hardened and Ground Worm and Wheel Gear Box
  • Worm Wheel of Top Quality Bronze
  • 7 Gallon Coolant Tank with Pump
  • 30" Material Length Stop
  • One 12-1/2" Diameter (315 mm) HSS Blade
  • One Blade Wrench
  • One Gallon Concentrated Coolant
  • 230 or 460 Volt/3 Phase Electrics (must specify voltage)
  • Warranty: One Year Parts
  • Made in USA
More Specs

Tooling


CPO 350 PK

  • Power Double Self-Centering Vise Assures Burr-Free Cuts
  • Operator Controlled Trigger Switch
  • Miter Capabilities 135 degrees, 90 degrees Left and 45 degrees Right
  • Miter Locking Devise Stops at 45 degrees Left, Straight 90 degrees, and 45 degrees Right
  • Capable of Slotting
  • Two Cutting Speeds
  • Double Reduction, Hardened and Ground Worm and Wheel Gear Box
  • Worm Wheel of Top Quality Bronze
  • 7 Gallon Coolant Tank with Pump
  • 30" Material Length Stop
  • One 12-1/2" Diameter (315 mm) HSS Blade
  • One Blade Wrench
  • One Gallon Concentrated Coolant
  • 230 or 460 Volt /3 Phase Electrics (must specify voltage)
  • Warranty: One Year Parts
  • Made in USA
More Specs

Tooling


CPO 350 PKPD

  • Semi-Automatic Cycle
  • Pneumatic Power Down Feed with Electric Controls
  • Separate Feed Control of both Feed Rate and Feed Pressure
  • Power Double Self-Centering Vise Assures Burr-Free Cuts
  • Emergency Stop Button
  • Miter Capabilities 135 degrees, 90 degrees Left and 45 degrees Right
  • Miter Locking Devise Stops at 45 degrees Left, Straight 90 degrees, and 45 degrees Right
  • Capable of Slotting
  • Two Cutting Speeds
  • Double Reduction, Hardened and Ground Worm and Wheel Gear Box
  • Worm Wheel of Top Quality Bronze
  • 7 Gallon Coolant Tank with Pump
  • 30" Material Length Stop
  • One 12-1/2" Diameter (315 mm) HSS Blade
  • One Blade Wrench
  • One Gallon Concentrated Coolant
  • 230 or 460 Volt /3 Phase Electrics (must specify voltage)
  • Warranty: One Year Parts
  • Made in USA
More Specs

Tooling


 

Information Request Webform

Name*   Title*
Company* Phone*
Address* E-mail*
City*

Fax

 

 

State*               Zip*      
Comments*

  

                                                           *Required Fields

 

Home | Material Handling | Sawing Machines | Drilling Machines | Ironworkers | Shears & Notchers | Press Brakes | Presses | Thermal Cutting | Plate Rolls | Benders & Shape Roll | Pipe & Tube Notcher | Bevel, Grind, Debur, Vibratory | Threading Machines | Welding Positioners | Material Handling | Cutters,Bits,& Coolant

Questions or problems regarding this web site should be directed to admin@amandb.com.
Copyright © 2006 American Machinery And Blade. All rights reserved.
Last modified: 04/04/08.