The tooth distnace is equally spaced. The number of
teeth per inch (25.4 mm) denotes the tooth of the
saw blade.
The tooth disances vary within
a group of teeth. The smallest and the largest tooth
pitch denotes the variable tooth of saw blades
Bandsaw
Geometry
Tooth
Forms
Only correct choice of tooth forms
allows effeicient cutting with low vibration, four basic
types are available.
Designed For:
- short chipping materials
-- Light wall thickness
Data:
- rake angle zero degrees
- 4 to 18 tpi
Article Groups
100, 110, 420
Designed For:
- short chipping materials
-- Large cross sections
Data:
-positive rake angle
- 0.75 to 6 tpi
Article Groups
100, 110, 420, 426, 427
Designed For:
- short chipping materials
-- Structurals
Data:
- rake angle zero degrees
- Variable tooth of 3/4 to 10/14 tpi
Article Groups
430
Designed For:
low vibration cutting
solid materials
Data:
positive tank angle
variable tooth pitch of:
0.75/1.25 to 4/6 tpi
Article Groups
431, 434,435,436, 531
Tooth Set
Apart from tooth pitch and tooth form
the exact set is essential for the eprformance of
the saw blade. The correct clearance of back is
achieved by the specific set for the cutting
application.This is to avoid blade pinching, very
important in problematic cutting jobs.Width and type
of set are tuned to the cutting application. Standard Raker Set (S, SW) up to 10 tpi
tooth forms N,H Variable Group Set (G, GW) 0.75/1.25 to 10/14 tpi
tooth form K Wavy Set (W) 14 to 32
tpi
tooth form N
ALLIED AME - BERTSCH - BROBO - BURR-KING - CARELL - CLAUSING -
CLEVELAND - COLLINS - DAKE - DURA-BORE - EAGLE - ERCOLINA - EVERETT
- EVOLUTION - FALLS - FICEP - HECK - HOSSFIELD - HYD-MECH - IKS -
JANCY - KALAMAZAOO - KAMA - KOIKE - ARONSON - LENOX - MEP - NATIONAL
- NITTO-KOHKI - PERFECTION - PIRANHA - SCOTCHMAN - SLUGGER -
STANDARD - TRUMPF - WA WHITNEY - WYNN'S
