Jancy- Slugger JM101

ALLIED AME - BERTSCH - BROBO - BURR-KING - CARELL - CLAUSING - CLEVELAND - COLLINS - DAKE - DURA-BORE - EAGLE - ERCOLINA - EVERETT - EVOLUTION - FALLS - FICEP - HECK - HOSSFIELD - HYD-MECH - IKS - JANCY - KALAMAZAOO - KAMA - KOIKE - ARONSON - LENOX - MEP - NATIONAL - NITTO-KOHKI - PERFECTION - PIRANHA - SCOTCHMAN - SLUGGER - STANDARD - TRUMPF - WA WHITNEY - WYNN'S

Slugger JM101

The JM101's durable light weight (28lbs) design increases production while reducing operator fatigue. Using Jancy's patented Slugger® cutters the JM101 accurately drills burr free holes up to 1-3/8 diameter through 2 of carbon steel in seconds. Patented arbor system provides optimal pilot tension for predrilling alignment and positively ejects slug after the cut. The 16-1/4 overall height is ideal for steel fabricators, contractors and maintenance workers drilling holes in hard-to-reach locations. The JM101's rugged cast aluminum machine frame and motor housing offer years of proven reliable service. Improved magnetic holding force secures the JM101 to the work surface, increasing stability when drilling.

• Impulse switch turns motor off if excessive movement is detected while drilling,
protecting operator and machine.
• Precision-machined cast aluminum frame.
• Double insulated dual coil magnet.
• Safety strap and chip shield included with every machine.
• Carry case included.
• Accepts Slugger® cutters up to 1-3/8 diameter and 2 depth of cut with no modification.
• Positive slug ejection system ensures slug will not remain in after the cut.
• Roller bearing assembly supports arbor system, increasing performance, while reducing wear.
• Powerful motor with cast aluminum housing. Self lubricating Teflon® motor slide ways.
• Optional steel pinion shaft for left-or-right hand operation, for operator convenience.

Specifcations:

Height	16-1/4"
Width	7-1/2'
Length	9-3/8'
Weight	28lbs.
Motor	0.9 HP 700W (single phase) 120V / 6.0A 450RPM (no load)
Arbor bore	3/4"
Drill point breakaway	650lbs. on 1" plate
Magnet base dimensions	3" x 6-1/4"
Magnet dead lift	1480lbs. on 1" plate
Slugger cutter diameter (maximum)	1-3/8"
Slugger depth of cut (maximum)	2"
Total travel	2 9/16"