The Piranha Model
PII-88 has dual-operator controls for the punch station and
shear/coper stations and an Automatic Urethane Hold Down on the Plate
and Angle Shear. Both ends of the machine can be operated independently
of each other at the same time. A large, open punch station allows the
use of a virtually unlimited range of standard accessories and special
tooling, in addition to a 24" plate shear capacity.
STANDARD FEATURES:
Complete Punching Attachment with stripper
10 Punch and Die sets
Front and rear 2 position joy stick controls (electric)
Front and rear Remote Electric Foot Switches
Front limit switch stroke control
Set of Round Bar Knives [2 way] (customers choice to 1-1/2")
Set of 20.625" Plate Shear Knives [4 way]
Set of Blank Knives to extend shear to 24"
Set of Coper Knives [2 way top] [4 way bottom]
Set of Angle Shear Knives [8 way top] [4 way bottom]
Chip Buckets (coper end)
Extra Oil Filter
Coupling Wrench
Intergral Lifting Lug for instant portability
CAPACITIES & SPECIFICATIONS: MODEL
PII-88 88 TON
Throat Depth
9"
Open Height
14"
Closed Height w/o Die Block
7-3/4"
Work Stations From Floor
41"
Hydraulics:
Pump GPM
System R/V PSI
7.5
3500
Stroke Length
7"
Bar Shear:
Round(Min. to Max.)
Square (Min. to Max.)
1/4" to 1-1/2"
1/2 " to 1"
Motor STD. 230/460 1800 rpm
Opt. Phase and Voltage
On Request
ALLIED AME - BERTSCH - BROBO - BURR-KING - CARELL - CLAUSING -
CLEVELAND - COLLINS - DAKE - DURA-BORE - EAGLE - ERCOLINA - EVERETT
- EVOLUTION - FALLS - FICEP - HECK - HOSSFIELD - HYD-MECH - IKS -
JANCY - KALAMAZAOO - KAMA - KOIKE - ARONSON - LENOX - MEP - NATIONAL
- NITTO-KOHKI - PERFECTION - PIRANHA - SCOTCHMAN - SLUGGER -
STANDARD - TRUMPF - WA WHITNEY - WYNN'S
