The Piranha Model
PII-35 is a complete 5-station fabrication center with
dual-slide controls for the punch station and shear/coper stations. A
large, open punch station allows the use of a virtually unlimited range
of standard accessories and special tooling.
STANDARD FEATURES:
Complete Punching Attachment with stripper
Electric Punch End Control including Remote Foot Switch & Limit
Switch
Manual Shear and Coper Control
Set of Round Bar Knives [2 way] (customers choice to 1-3/8")
Set of 10" Plate Shear Knives [4 way]
Set of 13" Plate Shear Knives [4 way] (instead of Round Bar
Knives and 10" Plate Shear Knives)
Set of Angle Shear Knives [8 way top] [4 way bottom]
Extra Oil Filter
Coupling Wrench & 3/8" Allen Wrench
Intergral Lifting Lug for instant portability
CAPACITIES & SPECIFICATIONS: MODEL
PII-35 35 TON
Throat Depth
7"
Open Height
10"
Closed Height w/o Die Block
7-1/4"
Work Stations From Floor
40"
Hydraulics:
Pump GPM
System R/V PSI
4.4
3500
Stroke Length
4-1/4"
Bar Shear:
Round(Min. to Max.)
Square (Min. to Max.)
Optional
1/4" to 1-3/8"
1/2" to 1"
Motor STD. 230/460 1800 rpm
Opt. Phase and Voltage
On Request
ALLIED AME - BERTSCH - BROBO - BURR-KING - CARELL - CLAUSING -
CLEVELAND - COLLINS - DAKE - DURA-BORE - EAGLE - ERCOLINA - EVERETT
- EVOLUTION - FALLS - FICEP - HECK - HOSSFIELD - HYD-MECH - IKS -
JANCY - KALAMAZAOO - KAMA - KOIKE - ARONSON - LENOX - MEP - NATIONAL
- NITTO-KOHKI - PERFECTION - PIRANHA - SCOTCHMAN - SLUGGER -
STANDARD - TRUMPF - WA WHITNEY - WYNN'S
