P250

ALLIED AME - BERTSCH - BROBO - BURR-KING - CARELL - CLAUSING - CLEVELAND - COLLINS - DAKE - DURA-BORE - EAGLE - ERCOLINA - EVERETT - EVOLUTION - FALLS - FICEP - HECK - HOSSFIELD - HYD-MECH - IKS - JANCY - KALAMAZAOO - KAMA - KOIKE - ARONSON - LENOX - MEP - NATIONAL - NITTO-KOHKI - PERFECTION - PIRANHA - SCOTCHMAN - SLUGGER - STANDARD - TRUMPF - WA WHITNEY - WYNN'S

P250

The is a manual cold saw equipped with a base and coolant tank, one speed with miter cutting. Available in both single and three phase.

Standard Features

10" Blade
Metal base with coolant tank
1 Hp motor
45 rpm blade speed
Manual saw head and vise movement
Material Stop
Flood Coolant with pump
Anti-Burr clamp
IP55 control handle with switch
Miter 45° left

Hyd-Mech Specifications

MODEL NO.	P250
Capacity Round Hollow 90°: Square Hollow 90°: Rectangular Hollow 90°: Round Hollow 45°: Square Hollow 45°: Rectangular Hollow 45°: Round Solid 90°: Square Solid 90°: Rectangular Solid 90°: Round Solid 45°: Square Solid 45°: Rectangular Solid 45°:	2-3/4’’ 2-1/4’’ 3-1/2’’ x 1-3/4’’ 2-1/2’’ (left) 2’’ (left) 2-3/4’’ x 1-3/4’’ (left) 1/2’’ 3/4’’ 3/4’’ x 1’’ 3/4’’ (left) 1/2’’ (left) 3/4’’ x 1’’ (left)	70 mm 57 mm 89 mm x 44 mm 64 mm (left) 51 mm (left) 70 mm x 44 mm (left) 13 mm 19 mm 19 mm x 25 mm 19 mm (left) 13 mm (left) 19 mm x 25 mm (left)
Vise Opening:	4’’	102 mm
Blade Diameter:	10"	254 mm
Blade Speed:	45 rpm	45 rpm
Motors:	1 ph. or 3 ph 1HP	1 ph. or 3 ph 1HP
Table Height:	36"	914 m
Machine Weight:	155 lbs	70 kg
Machine Dimensions:	32" wide 33" long 60" high	813 mm wide 838 mm long 1524 mm high