Double Operation IW

The Piranha Model PII-35 is a complete 5-station fabrication center with dual-slide controls for the punch station and shear/coper stations. A large, open punch station allows the use of a virtually unlimited range of standard accessories and special tooling.

The Piranha Model PII-65 has an Automatic Urethane Hold Down on the Plate and Angle Shear, dual-operator controls for the punch station and shear/coper stations, in addition to a 24" plate shear capacity, the largest in it's tonnage class. Both ends of the machine can be operated independently of each other at the same time.

The Piranha Model PII-88 has dual-operator controls for the punch station and shear/coper stations and an Automatic Urethane Hold Down on the Plate and Angle Shear. Both ends of the machine can be operated independently of each other at the same time. A large, open punch station allows the use of a virtually unlimited range of standard accessories and special tooling, in addition to a 24" plate shear capacity.

The Piranha Models PII-110 and PII-140 have dual-operator electric controls (foot pedal and joystick) for the punch stations and shear/coper stations. Also featured are Automatic Urethane Hold Downs on the Angle, Plate and Bar Shears. The large, open punch stations allow the use of a virtually unlimited range of standard accessories and special tooling.

The Piranha Models PII-110 and PII-140 have dual-operator electric controls (foot pedal and joystick) for the punch stations and shear/coper stations. Also featured are Automatic Urethane Hold Downs on the Angle, Plate and Bar Shears. The large, open punch stations allow the use of a virtually unlimited range of standard accessories and special tooling.