PNF350AV

ALLIED AME - BERTSCH - BROBO - BURR-KING - CARELL - CLAUSING - CLEVELAND - COLLINS - DAKE - DURA-BORE - EAGLE - ERCOLINA - EVERETT - EVOLUTION - FALLS - FICEP - HECK - HOSSFIELD - HYD-MECH - IKS - JANCY - KALAMAZAOO - KAMA - KOIKE - ARONSON - LENOX - MEP - NATIONAL - NITTO-KOHKI - PERFECTION - PIRANHA - SCOTCHMAN - SLUGGER - STANDARD - TRUMPF - WA WHITNEY - WYNN'S

PNF350AV

The PNF350AV is a Non-Ferrous cutting manual saw with pneumatic operating vise. Equipped with a two-speed motor provides high-speed blade rpm (1700 & 3400 rpm) for cutting of aluminum, brass, pvc, and other soft metals. With a vise opening of 7", it is able to cut a large range of shape and sizes of extruded aluminum.

Standard Features

14" Blade
3 Hp motor
2 blade speed (1700 & 3400 rpm)
Manual saw head move by means of a IP55 control handle with switch
Safety head locking device
Rotating table on large roller bearings
Two pneumatic operating vises
Vises with movable aluminum jaws
Mist coolant system

Optional Features

Foot Pedal Control
Chip Collector
In feed & Out feed Roller tables
Roller table ‘Flip over’ material stop with Ruler
Pneumatic vertical vise

Hyd-Mech Specifications

MODEL NO.	PNF350AV
Capacity Round Hollow 90°: Square Hollow 90°: Rectangular Hollow 90°: Round Hollow 45°: Square Hollow 45°: Rectangular Hollow 45°: Round Hollow 45° tilted head: Square Hollow 45° tilted head: Rectangular Hollow 45° tilted head: Round Solid 90°: Square Solid 90°: Rectangular Solid 90°: Round Solid 45°: Square Solid 45°: Rectangular Solid 45°: Round Solid 45° tilted head: Square Solid 45° tilted head: Rectangular Solid 45° tilted head:	4-3/4’’ 4’’ 7’’ x 2-3/4’’ 4-1/4’’ 3-3/4’’ 5-1/3’’ x 1-1/3’’ 2’’ 2’’ 6-1/3’’ x 1-1/3’’ 3-1/2’’ 3’’ 3’’ x 3’’ 3’’ 2’’ 2’’ x 3’’ 2’’ 2’’ 7’’ x 3/4’’
Vise Opening:	7’’
Blade Diameter:	14"
Shuttle Vise:	n/a
Blade Speed:	Low: 1,700 rpm High: 3,400 rpm
Motors:	Low: 2.4 HP High: 2.9 HP
Table Height:	36-1/4"
Machine Weight:	353 lbs
Machine Dimensions:	61" wide 67" long 68" high