|
Tight radius solid profile bending
attachment.
Fits 030, TB60, SB48 and 060 machines
Part# PAR-051
|
Bending Capacities |
|
Material Type |
Maximum Diameter |
| Round solids
|
.750 |
| Rectangular
solids |
.187 x 4.000 |
| Solid square
|
.625 x .625 |
| Angle Iron
|
2.500 x .312 |
Counterbending die support bracket required
when bending radii 225mm and larger.
Part# PAR-050E
Roller counterbending dies are recom-
mended when bending solid rounds and
heavy wall tube or pipe.
Part# PAR-050I
|
Counterbending Dies
To maintain quality
bends counterbending dies should be replaced when face of the die
touches center former. Tool life will vary depending on material to be
bent. Standard brass dies are designed to be compatible with most
materials.Replacement dies are also available in steel and polymer.
Consult CML USA for application information
Ercolina's aerosol
bending lubricant improvesbend quality, reduces material drag while
extending counterbending die life.
| Part# |
Description |
|
PAR-810 |
One (1)12 ounce
can |
|
PAR-811 |
Nine (9)12
ounce cans |
Counterbending die support bracket required
for small bending radii 10 to 35mm.
Part# PAR-050C
Special former required for bending small
radii 10 to 35mm.
Part# PAR-050S
|
ALLIED AME - BERTSCH - BROBO - BURR-KING - CARELL - CLAUSING -
CLEVELAND - COLLINS - DAKE - DURA-BORE - EAGLE - ERCOLINA - EVERETT
- EVOLUTION - FALLS - FICEP - HECK - HOSSFIELD - HYD-MECH - IKS -
JANCY - KALAMAZAOO - KAMA - KOIKE - ARONSON - LENOX - MEP - NATIONAL
- NITTO-KOHKI - PERFECTION - PIRANHA - SCOTCHMAN - SLUGGER -
STANDARD - TRUMPF - WA WHITNEY - WYNN'S
