|
| |
STANDARD FEATURES
- Clamp Type Backgauge-Manual Adjustable
X, Y, & Z - 24"
- 2 Speed Ram (50T - 70T)
- 3 Speed Ram (95T - 300T)
- NEMA Electrics
- Three Position Foot Pedal
- Depth Stop with Digital Readout
- Bottom Time Delay
- Hour Meter
- All Hydraulic Fluids Included
- American Made Motor
- Disconnect Switch
- American Made Hoses and Fittings
- All Steel Construction
- Hydraulic Pressure: 2750 PSI
- Cylinders are Steel, Double Acting
Piston Type with Hardened, Ground and Chromed Rods
- Hardened Pins with Spherical Bearings
for Alignment
- Front & Back of Bed Machined smooth for Mounting of Gauges
|
|
Multi-Switch Control Panel
(with emergency switch, run-job, and up-down buttons) and 3-position
fully guarded switch
|
 |
Handwheel Control to .001 for Depth of Bend Adjustment
Ram Tilt Micrometer
Pressure Gauge
Control Panel
Ram Machined With 1/2" or
3/4" Slot for Holding Dies
Bed Machined 3/4" x 3/4"
slot. (Die Riser Optional)
|
Sizes Available
|
17 Ton
4, 6
|
160 Ton
6, 8, 10, 12, 14
|
|
50 Ton
4, 6, 8, 10, 12
|
190 Ton
6, 8, 10, 12, 14
|
|
70 Ton
4, 6, 8, 10, 12, 14
|
240 Ton
6, 8, 10, 12, 14
|
|
95 Ton
6, 8, 10, 12, 14
|
300 Ton
6, 8, 10, 12
|
|
120 Ton
6, 8, 10, 12, 14
|
350 Ton
6, 8, 10, 12
|
|
Whether you bend plastic or
steel, theres a Betenbender Hydraulic Press Brake to match your needs, ranging
from the 17-ton model to the 350-ton. No matter the size, each machine features
convenient operation for maximum output, ease of maintenance for maximum
productivity.
Betenbender goes the extra
mile to build a Press Brake that works hard, works accurately, and stays that
way for years to come.
When your name goes on the
finished product, so does your reputation. We feel the same way. Compare
features. Compare results. You can count on first-class American technology,
rugged durability, versatility and economy when its manufactured by Betenbender.
Simple & Flexible Controls:
Use either a convenient multi-switch control panel or a
3-position fully guarded foot switch.
Accuracy:
Every Betenbender machine is thoroughly inspected and
tested. Parallelism is maintained between bed and ram, or at a preset angle, by
using precise automatic leveling controls. Parallelism is maintained at ± .002"
in low speed.
The ram bottom reversal point is
controlled by precise limit switches referenced off the bed. This isolates
housing deflections which can interfere with accuracy.
The side situated handwheel sets the
bottom limit of the ram stroke. Micrometer adjustment on the control end allows
for tilting or paralleling of the ram. A bed referenced control monitors the
actual distance between ram and bed, assuring repeatability independent of die
wear or end plate deflection.
Versatility:
Betenbenders press brakes have long, full tonnage stroke;
adjustable length and selectable speed combinations; adjustable height for short
stroke. A two-speed standard; three-speeds with infinitely adjustable low speed
is optional. This option prevents sudden whip up of the work during bending
operations.
Maintenance:
Clevis mounted cylinders eliminate cylinder binding by
reducing the possibility of oil leaks. Pins and bushings do not rotate under
load, resulting in much less wear than competitive products.
Easy Hydraulic System Maintenance:
The manifold assembly saves space and makes it easy to
replace many components. The convenient work height makes the job easier.
Convenient Settings:
Readouts in increments of .001" allows recorded settings
of closed heights.
Standard Components:
The control system components, micro switches, clamp-type
backgauge, hydraulic fluid and filter cartridges are all standard equipment,
making routine maintenance easier.
Flexibility:
2-speed ram is electrically controlled. It lets you shift
to a lower speed before coming into contact with sheet metal.
Control:
The ram stops at the point of reference and self-levels at
the bottom of every stroke. Main control cabinet enclosures are mounted in the
right housing containing magnetic, non-reversing motor starter and 110/120 volt
control circuit.
Safety and Reliability:
The control system operates at 110/120 volt using a
minimum of circuitry. The system operates predominantly with American made
electronics and American made motors.
Durability:
All-steel ends, rams and beds.
Electrical Equipment:
Meets requirements of NFPA79. It includes drip proof,
continuous duty 45Ί C ambient hydraulic pump motor wired for 230 or 460 volt, 3
phase, 60 hertz.
Ram Level:
Is accomplished by two hydraulic systems. One for each
cylinder, which keeps them parallel. Self-levels at bottom of each stroke even
if hydraulic system is out of adjustment.
|
ALLIED AME - BERTSCH - BROBO - BURR-KING - CARELL - CLAUSING -
CLEVELAND - COLLINS - DAKE - DURA-BORE - EAGLE - ERCOLINA - EVERETT
- EVOLUTION - FALLS - FICEP - HECK - HOSSFIELD - HYD-MECH - IKS -
JANCY - KALAMAZAOO - KAMA - KOIKE - ARONSON - LENOX - MEP - NATIONAL
- NITTO-KOHKI - PERFECTION - PIRANHA - SCOTCHMAN - SLUGGER -
STANDARD - TRUMPF - WA WHITNEY - WYNN'S
