DCSS Straight Side Press

Self contained hydraulic system with oil cooler and filter

Full length EIGHT way ram guides

Solid end frames to provide the most rigid design of any press

T-slots in the bed and ram

Two hand control station

A counterbalance valve for punching and a decompression system for bottoming applications are standard equipment

Loading Applications for
the Model DCSS Straight Side Press

Typical window for model DCSS, shown with air tank for die cushion and an automatic lubrication system

Center/Off-Center/Front to Back and/or Left to Right loading

Model DCSS500

Built similarly to the DC style press, the DCSS takes yet another step toward providing the most frame strength available on any press on the market.  The DCSS has enclosed end frames in lieu of the gap therefore allowing the least amount of deflection and the most rigidity.  The operator can still however have material or die pass through with windows located in the end frames.

Built with the same hydraulic system and solid welded construction as the DC, the DCSS gives you another layer of strength for even the most punishing applications.  Typically the bed and ram would stay within the frames, but optionally you can order the DCSS with ram and/or bed extensions to extend beyond the frames to give you even more die area.

The DCSS is also available up to 600 tons and is perfect for center load and off center loads left to right and/or front to back as well as virtually any other press application.