1001 D CNC Single Spindle Drill

The Ficep 1001 D is uniquely different than the concept of traditional CNC drill lines.  This product line features a movable spindle that rapidly travels the entire length of the material.  Once the spindle is at the programmed position, top and bottom internal clamps quickly secures the material as the drill positions to the programmed gauge line and commences drilling.

The versatility of this CNC system can be exhibited when processing the following typical applications:
 

901/6 D Single Spindle CNC Drill Line

The 901/6 D single spindle CNC drill line processes material in a conventional fashion as the sections are positioned automatically to the required length dimension along the infeed and outfeed conveyor.  The single spindle of the 901/6 D automatically rotates to accommodate any hole requirements in either flange or the web.

This system is equipped as standard with a six-position automatic tool changer to not only facilitate different holes size requirements but such applications as countersinking and tapping.  The proprietary Ficep software automatically determines when a tool is dull and changes this automatically to a re-sharpened tool.

The 901/6 D features a PC based CNC control which is provided with the proprietary Ficep software that permits remote troubleshooting with a phone connection through a modem.  This software not only permits checking of the software status, etc. but more importantly, the status of the hardware can be checked and monitored.