CPO 350 PK

Power Double Self-Centering Vise Assures Burr-Free Cuts
Operator Controlled Trigger Switch
Miter Capabilities 135 degrees, 90 degrees Left and 45 degrees Right
Miter Locking Devise Stops at 45 degrees Left, Straight 90 degrees, and 45 degrees Right
Capable of Slotting
Two Cutting Speeds
Double Reduction, Hardened and Ground Worm and Wheel Gear Box
Worm Wheel of Top Quality Bronze
7 Gallon Coolant Tank with Pump
30" Material Length Stop
One 12-1/2" Diameter (315 mm) HSS Blade
One Blade Wrench
One Gallon Concentrated Coolant
230 or 460 Volt /3 Phase Electrics (must specify voltage)
Warranty: One Year Parts
Made in USA

Cutting Speeds	Must Specify when Ordering
LT(Low Turn) designed for solid mild steel, solid stainless steel & thick wall pipe	LT (Low Turn) 22 rpm 44 rpm	Motor rate: 3 hp
	LT (Low Turn) variable speed drive 12 to 82 rpm	Motor rate: 5 hp
HT(High Turn) designed for thin wall tube and non-ferrous material	HT (High Turn) 44 rpm 88 rpm	Motor rate: 3 hp
	HT (High Turn) variable speed drive 24 to 208 rpm	Motor rate: 5 hp
SS (Single Speed) designed for 220v 1ph applications	SS (Single Speed) 44 rpm	Motor Rate: 3 hp
Factory Wired	Specify 208 3 ph 230 3 ph 460 3 ph 575 volt 3 ph 60 hz
Maximum Diameter Blade	14"	350 mm
Arbor Bore	1-9/16"	40 mm
Pin Spacing	4/12/64
Width	21-7/8"
Depth	43-1/2"
Height not including handle	56-1/4"
Height from floor to vise	37-7/16"
Shipping Weight	675 lbs.
TUBING Round Square Rectangle SOLID Round Square	90 Degree 4-7/8" 4-1/2" x 4-1/2" 5-1/2" x 4" 90 Degree 2" 2" x 2"	45 Degree 4-3/8" 4" x 4" 4" x 4" 45 Degree 1-3/4" 1-3/4" x 1-3/4"