CPO 275 PKPD

ALLIED AME - BERTSCH - BROBO - BURR-KING - CARELL - CLAUSING - CLEVELAND - COLLINS - DAKE - DURA-BORE - EAGLE - ERCOLINA - EVERETT - EVOLUTION - FALLS - FICEP - HECK - HOSSFIELD - HYD-MECH - IKS - JANCY - KALAMAZAOO - KAMA - KOIKE - ARONSON - LENOX - MEP - NATIONAL - NITTO-KOHKI - PERFECTION - PIRANHA - SCOTCHMAN - SLUGGER - STANDARD - TRUMPF - WA WHITNEY - WYNN'S

CPO 275 PKPD

STANDARD FEATURES

Semi-Automatic Cycle
Pneumatic Power Down Feed with Electric Controls
Separate Feed Control of both Feed Rate and Feed Pressure
Power Double Self-Centering Vise Assures Burr-Free Cuts
Emergency Stop Button
Miter Capabilities 135 degrees, 90 degrees Left and 45 degrees Right
Capable of Slotting
Two Cutting Speeds
Hardened and Ground Worm and Wheel Gear Box
Worm Wheel of Top Quality Bronze
7 Gallon Coolant Tank with Pump
30" Material Length Stop
One 10" Diameter (250 mm) HSS Blade
One Blade Wrench
One Gallon Concentrated Coolant
230 or 460 Volt/3 Phase Electrics (must specify voltage)
Warranty: One Year Parts
Made in USA

CAPACITIES & SPECIFICATIONS

Cutting Speeds	Must Specify when Ordering
LT(Low Turn) designed for solid mild steel, solid stainless steel & thick wall pipe	LT (Low Turn) 30 rpm 60 rpm	Motor rate: 2 hp
	LT (Low Turn) variable speed drive 15 to 90 rpm	Motor rate: 2 hp
HT(High Turn) designed for thin wall tube and non-ferrous material	HT (High Turn) 60 rpm 120 rpm	Motor rate: 2 hp
SS(Single Speed) designed for 220v 1ph applications	SS (Single Speed) 60 rpm	Motor rate: 2 hp
Factory Wired	Specify 208 3 ph 230 3 ph 460 3 ph 575 volt 3 ph 60 hz 220 1 ph (SS Model Only)
Maximum Diameter Blade	10-3/4"	275 mm
Arbor Bore	1-1/4"	32 mm
Pin Spacing	2/8/45
Width	21-7/8"
Depth	43-1/2"
Height not including handle	53-1/4"
Height from floor to vise	36-1/8"
Shipping Weight	600 lbs.
TUBING Round Square Rectangle SOLID Round Square	90 Degree 3-3/8" 3" x 3" 3-1/2" x 2-3/8" 90 Degree 1-1/2" 1-1/2" x 1-1/2"	45 Degree 2-3/4" 2-5/8" x 2-5/8" 2-5/8" x 2-5/8" 45 Degree 1" 1" x 1"