STANDARD FEATURES

• Power Double Self-Centering Vise Assures Burr-Free Cuts
• Operator Controlled Trigger Switch
• Miter Capabilities 135 degrees, 90 degrees Left and 45 degrees Right
• Capable of Slotting
• Two Cutting Speeds
• Hardened and Ground Worm and Wheel Gear Box
• Worm Wheel of Top Quality Bronze
• 7 Gallon Coolant Tank with Pump
• 30" Material Length Stop
• One 10" Diameter (250 mm) HSS Blade
• One Blade Wrench
• One Gallon Concentrated Coolant
• 230 or 460 Volt/3 Phase Electrics (must specify voltage)
• Warranty: One Year Parts
• Made in USA

CAPACITIES & SPECIFICATIONS

Cutting Speeds	Must Specify when Ordering
LT(Low Turn) designed for solid mild steel, solid stainless steel & thick wall pipe	LT (Low Turn) 30 rpm 60 rpm	Motor rate: 2 hp
	LT (Low Turn) variable speed drive 15 to 90 rpm	Motor rate: 2 hp
HT(High Turn) designed for thin wall tube and non-ferrous material	HT (High Turn) 60 rpm 120 rpm	Motor rate: 2 hp
SS(Single Speed) designed for 220v 1ph applications	SS (Single Speed) 60 rpm	Motor rate: 2 hp
Factory Wired	Specify 208 3 ph 230 3 ph 460 3 ph 575 volt 3 ph 60 hz 220 1 ph (SS Model Only)
Maximum Diameter Blade	10-3/4"	275 mm
Arbor Bore	1-1/4"	32 mm
Pin Spacing	2/8/45
Width	21-7/8"
Depth	43-1/2"
Height not including handle	53-1/4"
Height from floor to vise	36-1/8"
Shipping Weight	600 lbs.
TUBING Round Square Rectangle SOLID Round Square	90 Degree 3-3/8" 3" x 3" 3-1/2" x 2-3/8" 90 Degree 1-1/2" 1-1/2" x 1-1/2"	45 Degree 2-3/4" 2-5/8" x 2-5/8" 2-5/8" x 2-5/8" 45 Degree 1" 1" x 1"