|
| |
Monograph Millennium Series
The Monograph Millennium is a 5' x 10' effective cutting area, 5/8" maximum
capacity plasma only cutting machine. A unique, unitized table and guide frame
system supports the machine.
The cutting table incorporates a deep section downdraft design with a rear
exhaust port for easy fume collector interfacing. Screw type leveling pads and
forklift provisions make for easier positioning and installation.
This rigid structure and accompanying rack and pinion drive system support rapid
traverse speeds of 1400 inches per minute while maintaining required accuracies
at cutting speeds.
The featured control on the Monograph Millennium is the PC-based KARCNC by Koike
Aronson, Inc. The operating system on the KARCNC is Microsoft XP. The KARCNC
utilizes two microprocessors, one processor is dedicated to programming and the
other is dedicated to motion, making true multi-tasking possible.
The KARCNC features a 12.1" TFT SVGA color flat panel display. Communication
with the KARCNC is possible using the following standard interfaces: 1.44
MB-3.5" internal floppy drive, USB port, network card, or a RS-232 9-pin D-sub
connector.
The Monograph Millennium is available with a high-speed model "H" motorized
torch lifter or a pneumatic floating head. The motorized torch lifter version
comes with initial height sensing and utilizes an Innerlogic ATC for arc voltage
feed back position control. The floating head version is recommended for light
gauge only applications.
Cutting systems that are supported on the Monograph Millennium include the
Hypertherm Powermax 1250 and the Thermal Dynamics Cutmaster 101 plasma cutting
systems. These systems support production cutting of 3/8" mild steel with
limited cutting of 5/8" plate.
MACHINE FEATURES
- 5' x 10' Effective Cutting Area
- Unitized One Piece Construction
- 1400 IPM Rapid traverse speed
- Rack & Pinion Drive
- Single Tool Plasma Only
- 3" Stroke Hi-Speed Lifter Includes:
- Arc Voltage Control
- Initial Height Sensing
- HYPERTHERM® POWERMAX-1250® Plasma System (or)
THERMAL DYNAMICS® CUTMASTER 100 Plasma System
- Production Capacity 3/8" Mild Steel
- Table Capacity 5/8" Maximum
|
|
ALLIED AME - BERTSCH - BROBO - BURR-KING - CARELL - CLAUSING -
CLEVELAND - COLLINS - DAKE - DURA-BORE - EAGLE - ERCOLINA - EVERETT
- EVOLUTION - FALLS - FICEP - HECK - HOSSFIELD - HYD-MECH - IKS -
JANCY - KALAMAZAOO - KAMA - KOIKE - ARONSON - LENOX - MEP - NATIONAL
- NITTO-KOHKI - PERFECTION - PIRANHA - SCOTCHMAN - SLUGGER -
STANDARD - TRUMPF - WA WHITNEY - WYNN'S
