The Piranha Models
PII-110 and PII-140 have dual-operator electric controls (foot
pedal and joystick) for the punch stations and shear/coper stations.
Also featured are Automatic Urethane Hold Downs on the Angle, Plate and
Bar Shears. The large, open punch stations allow the use of a virtually
unlimited range of standard accessories and special tooling.
STANDARD FEATURES:
Complete Punching Attachment with stripper
10 Punch and Die sets (9/16" thru 1-9/16")
Automatic Urethane Hold Down on the Plate, Angle, and Bar Shear
Front and rear 2 position joy stick controls (electric)
Front and rear Remote Electric Foot Switches
Front limit switch stroke control
Set of Round Bar Knives [2 way] (customers choice to 2")
Set of 14.5" Plate Shear Knives [4 way]: For PII-110
Set of 16.625" Plate Shear Knives [4 way]: For PII-140
Set of 20.5" Plate Shear Knives [4 way] instead of Round Bar
Knives and 16.625" Plate Shear
Knives: For PII-140
Extra Blank Knife to extend shear to 18" on PII-110 or 20.5" on
PII-140
Set of Coper Knives [2 way top] [4 way bottom]
Set of Angle Shear Knives [2 way top] [4 way bottom]
Chip Buckets (coper end)
Extra Oil Filter
Coupling Wrench
Intergral Lifting Lug for instant portability
CAPACITIES & SPECIFICATIONS: MODEL
PII-110 110 TON
Throat Depth
20.5"
Open Height
14"
Closed Height w/o Die Block
7-3/4"
Work Stations From Floor
44"
Hydraulics:
Pump GPM
System R/V PSI
12.5
3700
Stroke Length
7"
Bar Shear:
Round(Min. to Max.)
Square (Min. to Max.)
1/2" to 2"
1/2" to 1-3/8"
Motor STD. 230/460 1800 rpm
Opt. Phase and Voltage
On Request
ALLIED AME - BERTSCH - BROBO - BURR-KING - CARELL - CLAUSING -
CLEVELAND - COLLINS - DAKE - DURA-BORE - EAGLE - ERCOLINA - EVERETT
- EVOLUTION - FALLS - FICEP - HECK - HOSSFIELD - HYD-MECH - IKS -
JANCY - KALAMAZAOO - KAMA - KOIKE - ARONSON - LENOX - MEP - NATIONAL
- NITTO-KOHKI - PERFECTION - PIRANHA - SCOTCHMAN - SLUGGER -
STANDARD - TRUMPF - WA WHITNEY - WYNN'S
