CPO 350 NFPK

Power Double Self-Centering Vise Assures Burr-Free Cuts
Operator Controlled Trigger Switch
Miter Capabilities 135 degrees, 90 degrees Left and 45 degrees Right
Miter Locking Device: Quick, Accurate Settings-Stops at 45 degrees Left, Straight 90 degrees, and 45 degrees Right
Capable of Slotting
Two Cutting Speeds
Positive Cog Belt Driven
One Gallon Coolant Tank with Mist Lubrication System
30" Material Length Stop
One 13-1/2" Diameter (338 mm) Carbide Tipped Blade
One Blade Wrench
One Gallon Concentrated Coolant
230 or 460 Volt/3 Phase Electrics (must specify voltage)
Warranty: One Year Parts
Made in USA

Cutting Speeds	1,500 rpm	3,000 rpm
Motor Rate	Low rpm 3 hp	High rpm 3.8 hp
Factory Wired	Specify 208 3 ph 230 3 ph 460 3 ph 575 3 ph 60 hz
Maximum Diameter Blade	14"	350 mm
Arbor Bore	1-9/16"	40 mm
Pin Spacing	4/12/64
Width	21-7/8"
Depth	21-7/8"
Height not including handle	56-1/4"
Height from floor to vise	37-7/16"
Shipping Weight	675 lbs.
TUBING Round Square Rectangle SOLID Round Square	90 Degree 4-1/2" 4-1/4" x 4-1/4" 5-1/2" x 4" 90 Degree 3" 3" x 3"	45 Degree 4-1/2" 4" x 4" 4" x 4" 45 Degree 2-1/2" 2-1/2" x 2-1/2"