Home Special Offers Reference Good Ideas Leasing Info Request About Us Directions

ALLIED AME - BERTSCH - BROBO - BURR-KING - CARELL - CLAUSING - CLEVELAND - COLLINS - DAKE - DURA-BORE - EAGLE - ERCOLINA - EVERETT - EVOLUTION - FALLS - FICEP - HECK - HOSSFIELD - HYD-MECH - IKS - JANCY - KALAMAZAOO - KAMA - KOIKE - ARONSON - LENOX - MEP - NATIONAL - NITTO-KOHKI - PERFECTION - PIRANHA - SCOTCHMAN - SLUGGER - STANDARD - TRUMPF - WA WHITNEY - WYNN'S

 

 

Home
Up
Material Handling
Sawing Machines
Drilling Machines
Ironworkers
Shears & Notchers
Press Brakes
Presses
Thermal Cutting
Plate Rolls
Benders & Shape Roll
Pipe & Tube Notcher
Bevel, Grind, Debur, Vibratory
Threading Machines
Welding Positioners
Material Handling
Cutters,Bits,& Coolant

                   

                                                            CPO 350

                                                            CPO 350

STANDARD FEATURES

  • Manual Double Self-Centering Vise Assures Burr-Free Cuts
  • Operator Controlled Trigger Switch
  • Miter Capabilities 135 degrees, 90 degrees Left and 45 degrees Right
  • Miter Locking Device Stops at 45 degrees Left, Straight 90 degrees, and 45 degrees Right
  • Capable of Slotting
  • Two Cutting Speeds
  • Double Reduction, Hardened and Ground Worm and Wheel Gear Box
  • Worm Wheel of Top Quality Bronze
  • 7 Gallon Coolant Tank with Pump
  • 30" Material Length Stop
  • One 12-1/2" Diameter (315 mm) HSS Blade
  • One Blade Wrench
  • One Gallon Concentrated Coolant
  • 230 or 460 Volt/3 Phase Electrics (must specify voltage)
  • Warranty: One Year Parts
  • Made in USA

 

 

 

 

 

 

 

 

 

 

CAPACITIES & SPECIFICATIONS

Cutting Speeds Must Specify when Ordering  
LT(Low Turn) designed for solid mild steel, solid stainless steel & thick wall pipe LT (Low Turn) 22 rpm 44 rpm Motor rate: 3 hp 3 hp
  LT (Low Turn) variable speed drive 12 to 82 rpm Motor rate: 5 hp
HT(High Turn) designed for thin wall tube and non-ferrous material HT (High Turn) 44 rpm 88 rpm Motor rate: 3 hp
  HT (High Turn) variable speed drive 24 to 208 rpm Motor rate: 5 hp
SS (Single Speed) designed for 220v 1 ph applications SS (Single Speed) 44 rpm Motor Rate: 3 hp
Factory Wired Specify 208 3 ph 230 3 ph 460 3 ph 575 volt 3 ph 60 hz  
Maximum Diameter Blade 14" 350 mm
Arbor Bore 1-9/16" 40 mm
Pin Spacing 4/12/64  
Width 21-7/8"  
Depth 43-1/2"  
Height not including handle 56-1/4"  
Height from floor to vise 37-7/16"  
TUBING Round Square Rectangle SOLID Round Square 90 Degree 4-7/8" 4-1/2" x 4-1/2" 5-1/2" x 4" 90 Degree 2" 2" x 2" 45 Degree 4-3/8" 4" x 4" 4" x 4" 45 Degree 1-3/4" 1-3/4" x 1-3/4"
 

 

Information Request Webform

Name*   Title*
Company* Phone*
Address* E-mail*
City*

Fax

  

 
State*               Zip*      
Comments*

  

                                                           *Required Fields

Home | Material Handling | Sawing Machines | Drilling Machines | Ironworkers | Shears & Notchers | Press Brakes | Presses | Thermal Cutting | Plate Rolls | Benders & Shape Roll | Pipe & Tube Notcher | Bevel, Grind, Debur, Vibratory | Threading Machines | Welding Positioners | Material Handling | Cutters,Bits,& Coolant

Questions or problems regarding this web site should be directed to admin@amandb.com.
Copyright © 2006 American Machinery And Blade. All rights reserved.
Last modified: 04/04/08.