Home Special Offers Reference Good Ideas Leasing Info Request About Us Directions

ALLIED AME - BERTSCH - BROBO - BURR-KING - CARELL - CLAUSING - CLEVELAND - COLLINS - DAKE - DURA-BORE - EAGLE - ERCOLINA - EVERETT - EVOLUTION - FALLS - FICEP - HECK - HOSSFIELD - HYD-MECH - IKS - JANCY - KALAMAZAOO - KAMA - KOIKE - ARONSON - LENOX - MEP - NATIONAL - NITTO-KOHKI - PERFECTION - PIRANHA - SCOTCHMAN - SLUGGER - STANDARD - TRUMPF - WA WHITNEY - WYNN'S

 

 

Home
Up
Material Handling
Sawing Machines
Drilling Machines
Ironworkers
Shears & Notchers
Press Brakes
Presses
Thermal Cutting
Plate Rolls
Benders & Shape Roll
Pipe & Tube Notcher
Bevel, Grind, Debur, Vibratory
Threading Machines
Welding Positioners
Material Handling
Cutters,Bits,& Coolant

                                           

                                                             CPO 275

                                   CPO 275
 

STANDARD FEATURES

  • Manual Double Self-Centering Vise Assures Burr-Free Cuts
  • Operator Controlled Trigger Switch
  • Miter Capabilities 135 degrees, 90 degrees Left and 45 degrees Right
  • Miter Locking Device stops at 45 Degrees Left, Straight 90 Degrees, and 45 Degrees Right
  • Capable of Slotting
  • Two Cutting Speeds
  • Hardened and Ground Worm and Wheel Gear Box
  • Worm Wheel of Top Quality Bronze
  • 7 Gallon Coolant Tank with Pump
  • 30" Material Length Stop
  • One 10" Diameter (250 mm) HSS Blade
  • One Blade Wrench
  • One Gallon Concentrated Coolant
  • 230 or 460 Volt/3 Phase Electrics (must specify voltage)
  • Warranty: One Year Parts
  • Made in USA

 

 

 

 

 

 

 

 

 

 

CAPACITIES & SPECIFICATIONS

Cutting Speeds Must Specify when Ordering
LT(Low Turn) designed for solid mild steel, solid stainless steel & thick wall pipe LT (Low Turn)

30 rpm

60 rpm		 Motor rate: 2 hp
  LT (Low Turn) variable speed drive 15 to 90 rpm Motor rate: 2 hp
HT(High Turn) designed for thin wall tube and non-ferrous material HT (High Turn)

60 rpm

120 rpm		 Motor rate:

2 hp

 
  HT (High Turn)

variable speed drive

30 to 150 rpm		 Motor rate:

2 hp
SS(Single Speed) designed for 220v 1 ph applications SS (Single Speed)

60 rpm 		Motor rate:

2 hp
Factory Wired Specify

208 3 ph

230 3 ph

460 3 ph

575 volt 3 ph 60 hz

220 1 ph (SS Model Only) 		 
Maximum Diameter Blade 10-3/4" 275 mm
Arbor Bore 1-1/4" 32 mm
Pin Spacing 2/8/45  
Width 21-7/8"  
Depth 43-1/2"  
Height not including handle 53-1/4"  
Height from floor to vise 36-1/8"  
Shipping Weight 600 lbs.  
TUBING
Round
Square

Rectangle		 90 Degree
3-3/8"
3" x 3"

3-1/2" x 2-3/8"		 45 Degree
2-3/4"
2-5/8" x 2-5/8"

2-5/8" x 2-5/8"
SOLID
Round
Square		 90 Degree
1-1/2"
1-1/2" x 1-1/2"		 45 Degree
1"
1" x 1"

 

Information Request Webform

Name*   Title*
Company* Phone*
Address* E-mail*
City*

Fax

  

 
State*               Zip*      
Comments*

  

                                                           *Required Fields

 

 

Home | Material Handling | Sawing Machines | Drilling Machines | Ironworkers | Shears & Notchers | Press Brakes | Presses | Thermal Cutting | Plate Rolls | Benders & Shape Roll | Pipe & Tube Notcher | Bevel, Grind, Debur, Vibratory | Threading Machines | Welding Positioners | Material Handling | Cutters,Bits,& Coolant

Questions or problems regarding this web site should be directed to admin@amandb.com.
Copyright © 2006 American Machinery And Blade. All rights reserved.
Last modified: 04/04/08.