Ficep Corporation produces
the Type A and B models
specifically for those heavy
plate fabrication
applications that typically
must process plates up to 3"
in thickness. Both models
combine the operation of
hole generation either
through drilling, punching
or both, marking and
burning. The burning
operation can be with either
plasma, oxy/fuel or both to
provide the most
cost-effective process based
upon what the application
dictates.
Ficep Corporation produces
the Type A and B models
specifically for those heavy
plate fabrication
applications that typically
must process plates up to 3"
in thickness. Both
models combine the operation
of hole generation either
through drilling, punching
or both, marking and
burning. The burning
operation can be with either
plasma, oxy/fuel or both to
provide the most
cost-effective process based
upon what the application
dictates.
Model Type C
The combination of
performing these different operations in one CNC center on
material ranging for gauge material up to 1" thick plate
makes the Type C product line extremely versatile and
unique. The ability to incorporate high speed milling into
this system introduces a new family of parts that cannot be
produced on competitive machines. In close tolerance
applications where a plasma edge is not satisfactory the
plasma cut edge can easily be milled to the precise
tolerance that the part requires. This added capability
gives the Type C the opportunity to tackle many applications
that previously required that the part be routed to several
different work centers to complete.
ALLIED AME - BERTSCH - BROBO - BURR-KING - CARELL - CLAUSING -
CLEVELAND - COLLINS - DAKE - DURA-BORE - EAGLE - ERCOLINA - EVERETT
- EVOLUTION - FALLS - FICEP - HECK - HOSSFIELD - HYD-MECH - IKS -
JANCY - KALAMAZAOO - KAMA - KOIKE - ARONSON - LENOX - MEP - NATIONAL
- NITTO-KOHKI - PERFECTION - PIRANHA - SCOTCHMAN - SLUGGER -
STANDARD - TRUMPF - WA WHITNEY - WYNN'S
