Limit switch

High speed gears are made of Nickel-Chrome Steel and are heat-treated and ground for durability.

Powerful 2 Hp spindle drive motor for heavy-duty cutting

Extra auxiliary dial for spindle feed depth indication, allows review of spindle feed depth, .0394" to 7.874".

Special spindle balance mechanism, superior to traditional balance mechanism and extends Balance Spring life.

Coolant System

Low volt and overload protection

Tool kit and manuals

High-quality cast-iron arm with heat-treated and ground slides for smooth and accurate head positioning.

The bearing bracket of gear-box is fitted with standard bearings to fit arm slide for smooth gear-box operation.

High speed gears are made of Nickel-Chrome Steel and are heat-treated and ground for durability.

Powerful 3 Hp, 2-speed, heavy-duty spindle drive motor.

Overload protection device

The main spindle is balanced by a specially shaped spring on model CL1100 and by an adjustable block on model CL1200H.

Coolant System

Low volt and overload protection

Model CL1200H is equipped with hydraulic clamping.

With a push of a button you can have arm unclamped then move vertically, or stop then clamp automatically.

Equipped with hydraulic Step-by-Step clamping system, with proper selection on push button switch. Column, arm, gearbox can be clamped/released independently. Very easy to be operated, and tools will always stay at the same point after tools shifting.

Gears in gear box are cooled by oil cycled by an oil pump to minimize gear wear.

Friction type disc clutch absorbs impact force caused by vertical movement of spindle, and protects all transmission units inside gearbox. With quick spindle return, the clutch will help speed-up the tapping operation.

Specially designed manual tools ejector (drift). 

Special arm elevating device is provided to prevent arm from falling down abruptly after years of usage.

Speed pre-selection, speed change is hydraulically actuated. Fast and very easy to operate.

Coolant System

Equipped with hydraulic SEPARATE clamping unit. Vertical movement of arm is coordinated by an IC TIMER. With a single touch on push button switch, you can have arm unclamped then move vertically, or stop then clamp automatically. Very easy to operate, and tools will always stay at the same point after tool shifting.

Gears in gear box are cooled by oil cycled by an oil pump to minimize gear wear.

Friction type disc clutch absorbs impact force caused by vertical movement of spindle, and protects all transmission units inside gear box. With quick spindle return, the clutch will help speed-up the tapping operation.

Special automatic tool eject device is supplied to allow you to change tools quickly. (No drifter is required) 

Special arm elevating device is provided to prevent arm from falling down abruptly after years of usage.

Coolant System