|
|
|
- Bends 1/4 ” to 3” outside
diameters
- Bends multiple profiles
- Heavy-duty gear case
accommodates fifteen-inch centerline bend radius.
- Patented tooling system achieves
centerline bend radius two times diameter without mandrel tooling.
- Operator friendly microprocessor
with 24-volt control memorizes ten individual bend programs with
nine bends per program.
- Programmable bend angles with
LCD display 0 to 180 degrees
|
 |
|
|
|
- Bends 1/4" to
2-1/2"outside diameters
- Bends multiple
profiles
- Heavy-duty gear
case accommodates centerline radius up to fifteen inches
- Patented tooling
system achieves centerline radius two times diameter without a
mandrel
- Operator friendly
microprocessor memorizes thirty individual bend programs with nine
bends per program
- Programmable
bending angles with display 0 to 180 degrees
|
|
|
|
|
- Bending capacity 1/4" to 2-1/2"
Diameter
- Bends to 90° in (7) seconds
- Bends to 180° with maximum CLR of
15"
- CLR as small as 2D with non-mandrel
tooling
- PLC stores (30) programs (9) bends
within each
- Ideal for bending pipe, tube,
squares, rectangles, solids and other profiles
- Programmable material springback
compensation
- Patented tooling system with
multiple radii available
- Two bending speeds
|
|
|
|
|
- Bending capacity ¼″ to 2½″ Diameter
- Bends to 180° with maximum CLR of
11⅞″
- CLR as small as 2D with non-mandrel
tooling
- Ideal for bending pipe, tube,
squares, rectangles, solids and other profiles
- Replaces outdated ram style
hydraulic benders
- Programmable material springback
compensation
- Operator friendly controls
- Vernier scale for counterbend axis
position
- Patented tooling system with
multiple radii available
|
|
|
|
|
- Bends 1/4" to 2"outside
diameters
- Bends to 90 degrees in seven
seconds
- Patented tooling system achieves
centerline radius two times diameter without a mandrel
- 24-volt low voltage control
- Induction motor with
electromagnetic brake for greater accuracy
- Programmable bend angle with
display O to 180 degrees
- Programmable material spring
back settings with display ensures bend accuracy for a wide variety
of material
- Operator friendly microprocessor
with soft touch keyboard memorizes thirty individual bend programs
with nine bends per program
|
|
|
|
|
- Bends 1/4"to 2" outside
diameters
- Bends to 90 degrees in seven
seconds
- Patented tooling system achieves
centerline radius two times diameter without a mandrel
- 24-volt low voltage control
- Electronic motor brake and
constant speed control for greater accuracy
- Programmable bend angle with
display 0 to 180 degrees
|
|
|
|
|
- Bends ferrous and non-ferrous
materials 1/4" to 1-1/2"
- Replaces outdated ram style
hydraulic benders
- Programmable to bend angles 0 to
180°
- Bends to 90° in seven (7)
seconds
- Achieve bends as small as 2D
with non-mandrel tooling
- Programmable material spring
back compensation
- Portable bench top machine ideal
for electricians, plumbers bending pipe, hydraulic tube, conduit,
copper and other materials
|
|
ALLIED AME - BERTSCH - BROBO - BURR-KING - CARELL - CLAUSING -
CLEVELAND - COLLINS - DAKE - DURA-BORE - EAGLE - ERCOLINA - EVERETT
- EVOLUTION - FALLS - FICEP - HECK - HOSSFIELD - HYD-MECH - IKS -
JANCY - KALAMAZAOO - KAMA - KOIKE - ARONSON - LENOX - MEP - NATIONAL
- NITTO-KOHKI - PERFECTION - PIRANHA - SCOTCHMAN - SLUGGER -
STANDARD - TRUMPF - WA WHITNEY - WYNN'S
