PII-140 Dual Operator Ironworker
The Piranha Model PII-140 has dual-operator electric controls (foot pedal and joystick) for the punch stations and shear/coper stations. Also featured are Automatic Urethane Hold Downs on the Angle, Plate and Bar Shears. The large, open punch station allows the use of a virtually unlimited range of standard accessories and special tooling.
Standard Features
- Complete Punching Attachment with stripper
- 10 Punch and Die sets
- Automatic Urethane Hold Down on the Plate, Angle, and Bar Shear
- Front and rear 2 position joy stick controls (electric)
- Front and rear Remote Electric Foot Switches
- Front limit switch stroke control
- Set of Round Bar Knives [2 way] (customers choice to 2")
- Set of 14.5" Plate Shear Knives [4 way]: For PII-110
- Set of 16.625" Plate Shear Knives [4 way]: For PII-140
- Set of 20.5" Plate Shear Knives [4 way] instead of Round Bar Knives and 16.625" Plate Shear
- Knives: For PII-140
- Extra Blank Knife to extend shear to 18" on PII-110 or 20.5" on PII-140
- Set of Coper Knives [2 way top] [4 way bottom]
- Set of Angle Shear Knives [2 way top] [4 way bottom]
- Chip Buckets (coper end)
- Extra Oil Filter
- Coupling Wrench
- Intergral Lifting Lug for instant portability
Available Attachments
Pipe/Tube Notching Attachment | Channel Die Block | Bending Attachments
28XX Punch Attachment | Press Brake Tooling Holders | Quickset Gauging Tables
Channel Shear | Bar Bender | Mechanical Backgauges | Electrical Backgauge
Bending Backgauge | Roller Feed Tables
PII-140 Capacities & Specifications
| Throat Depth | 20.5" | Coper-Notcher (Tons) (Max.) |
95 4" x 6" x 3/8" |
| Open Height | 14" | Bending Attach. (Optional) | 18", 24", 36", 48" |
| Closed Height w/o Die Block |
7-3/4" | Punch End Strokes Per Minute |
24 @ 1" |
| Stroke Length | 7" | Work Station Height Approx. |
44" |
| Platen Table Size (D-W) | 16" x 36" | Hydraulics Pump GPM System R/V PSI |
15 3500 |
| Punch Hole Size (Max. Material) Max. Hole Size (Material) |
140 Tons 1-3/8" (1-1/4") 5" (5/16") |
Fluid Capacity (gal.) | 40 |
| Plate Shear | 20-1/2" Long 1" x 14" 3/4" x 18" 1/2" x 20" |
Motor Std. 230/460 3 Ph. 1800 RPM Opt Phase & Voltage Available |
20 HP 3 Ph. |
| Angle Shear | 6" x 6" x 5/8 | Dimensions (Net) W-L-H Approx. |
38" x 120" x 85" |
| Bar Shear Round (min. to max.) Square (min. to max.) |
1/2" to 2" 1/2" to 1-3/8" |
Weight (Net) Lbs. Approx. |
11,930 |