P-90 Single Operator Ironworker

P90

The Piranha Model P-90 Ironworker is a strong workhorse capable of performing in heavy applications.

The P-90 has more standard workstations than any other ironworker in its class. This includes punching, bending, bar shear, angle shear, round bar shear, and an integrated coper/notcher.
The P-90 also has a dovetail slide that allows an operator to switch from punching to bending in just a few seconds.
Furthermore, the P-90 has full electrical control of its stroke with a footswitch and limit switch stroke controls.
The no slug-loss shearing saves material, keeps the machine area cleaner, and offers larger material capacity than the competition. A wide variety of optional tooling is available to enhance the P-90's capabilities.
Piranha's incomparable integrated coper/notcher station outperforms any other ironworker. Notch from thick to thin, remove the full leg from angle iron, shave even the smallest piece from the end of the work piece, and maintain total control of the part – from any angle.

So, when comparing ironworkers, look at the complete package.

Standard Features

Complete Punching Attachment with split dove tail mounting
10 Punch and Die sets
12" bending Attachment with split dove tail mounting
Automatic Urethane Hold Down on the Punch Stripper and on Angle, Plate and Bar Shear
Front and rear 5 position joy stick controls (electric) with jog up & down, fast up & down, neutral
Remote Electric Foot Switch that can be connected at either end of the machine
Electric Limit Switches that can be set for stroke control when using foot control
Set of Round Bar Knives [2 way] (customers choice to 2)
Set of 16.625 Plate Shear Knives [4 way]
Set of 20.5" Plate Shear Knives [4 way] (instead of Round Bar Knives and 16.625" Plate Shear Knives)
Extra Blank Knife to extend shear to 20.5"
Set of Angle Knives [8 way top] [4 way bottom]
Set of Coper Knives [2 way top] [4 way bottom]
Chip Buckets (2 each)
Extra Oil Filter
Coupling Wrench & 3/8" Allen Wrench
Integral Lifting Lug for instant portability

Throat Depth	12"	Coper-Notcher (Tons) (Max.)	95 4" x 6" x 3/8"
Open Height	15-1/2"	Bending Attach. (std.) (Optional Length)	12" 24"
Closed Height w/o Die Block	10-1/4"	Punch End Strokes Per Minute	40 @ 3/4"
Stroke Length	5-1/4"	Work Station Height Approx.	44"
Platen Table Size (D-W)	14-1/2" x 21"	Hydraulics Pump GPM System R/V PSI	15 2650
Punch Hole Size (Max. Material) Max. Hole Size (Material)	90 Tons 1-1/8" (1") 5" (3/16")	Fluid Capacity (gal.)	25
Plate Shear	20-1/2" Long 1" x 12" 3/4" x 18" 1/2" x 20"	Motor Std. 230/460 3 Ph. 1800 RPM Opt Phase & Voltage Available	15 HP 3 Ph.
Angle Shear	6" x 6" x 5/8"	Dimensions (Net) W-L-H Approx.	35" x 90" x 66-1/2"
Bar Shear Round (min. to max.) Square (min. to max.)	1/2" to 2" 1/2" to 1-3/8"	Weight (Net) Lbs. Approx.	5800