P40 Ironworker

Single Operator

• Complete Punching Attachment with Automatic Urethane Punch Stripper
• 10 Punch and Die Sets
• 6" Bending Attachment
• Hold Down Assembly
• Set of 13" Plate Shear Knives
• Set of Angle Knives
• Set of Coper Knives
• Set of Chip Buckets
• Coper Table Guides, Set of 3
• Electric Foot Switch
• Extra Oil Filter
• Coupling Wrench & 1/2"
• Allen Wrench
• Integral Lifting Lug for Instant
• Portability

P50 Ironworker

Single Operator

• Complete Punching Attachment with split dove tail mounting
• 14 Punch and Die sets
• 8" bending Attachment with split dove tail mounting
• Automatic Urethane Hold Down on the Punch Stripper and on Angle
• Plate and Bar Shear
• Front and rear 5 position joy stick controls (electric) with jog up & down, fast up & down, neutral
• Remote Electric Foot Switch that can be connected at either end of the machine
• Electric Limit Switches that can be set for stroke control when using foot control
• Set of Round Bar Knives [2 way] (customers choice to 1-1/2")
• Set of 12.125 Plate Shear Knives [4 way]
• Set of Angle Knives [8 way top] [4 way bottom]
• Set of Coper Knives [2 way top] [4 way bottom]
• Chip Buckets (2 each)
• Extra Oil Filter
• Coupling Wrench & 3/8" Allen Wrench
• Integral Lifting Lug for instant portability

P70 Ironworker

Single End Ironworker

• Complete Punching Attachment with split dove tail mounting
• 10 Punch and Die sets
• 12" bending Attachment with split dove tail mounting
• Automatic Urethane Hold Down on the Punch Stripper and on Angle
• Plate and Bar Shear
• Front and rear 5 position joy stick controls (electric) with jog up & down, fast up & down, neutral
• Remote Electric Foot Switch that can be connected at either end of the machine
• Electric Limit Switches that can be set for stroke control when using foot control
• Set of Round Bar Knives [2 way] (customers choice to 2)
• Set of 14.50 Plate Shear Knives [4 way]
• Extra Blank Knife to extend shear to 18"
• Set of Angle Knives [8 way top] [4 way bottom]
• Set of Coper Knives [2 way top] [4 way bottom]
• Chip Buckets (2 each)
• Extra Oil Filter
• Coupling Wrench & 3/8" Allen Wrench
• Integral Lifting Lug for instant portability

P90 Ironworker

Single End Ironworker

• Complete Punching Attachment with split dove tail mounting
• 10 Punch and Die sets
• 12" bending Attachment with split dove tail mounting
• Automatic Urethane Hold Down on the Punch Stripper and on Angle, Plate and Bar Shear
• Front and rear 5 position joy stick controls (electric) with jog up & down, fast up & down, neutral
• Remote Electric Foot Switch that can be connected at either end of the machine
• Electric Limit Switches that can be set for stroke control when using foot control
• Set of Round Bar Knives [2 way] (customers choice to 2)
• Set of 16.625 Plate Shear Knives [4 way]
• Set of 20.5" Plate Shear Knives [4 way] (instead of Round Bar Knives and 16.625" Plate Shear Knives)
• Extra Blank Knife to extend shear to 20.5"
• Set of Angle Knives [8 way top] [4 way bottom]
• Set of Coper Knives [2 way top] [4 way bottom]
• Chip Buckets (2 each)
• Extra Oil Filter
• Coupling Wrench & 3/8" Allen Wrench
• Integral Lifting Lug for instant portability

P120 Ironworker

Single End Ironworker

• Complete Punching Attachment with split dove tail mounting
• 10 Punch and Die sets
• 12" Bending Attachment with split dove tail mounting
• Automatic Urethane Hold Down on the Punch Stripper and on Angle, Plate and Bar Shear
• Front and rear 5 position joy stick controls (electric) with jog up & down, fast up & down, neutral
• Remote Electric Foot Switch that can be connected at either end of the machine
• Electric Limit Switches that can be set for stroke control when using foot control
• Set of Round Bar Knives [2 way] (customers choice to 2)
• Set of 16.625 Plate Shear Knives [4 way]
• Set of 20.5" Plate Shear Knives [4 way] (instead of Round Bar Knives and 16.625" Plate Shear Knives)
• Extra Blank Knife to extend shear to 20.5"
• Set of Angle Knives [8 way top] [4 way bottom]
• Set of Coper Knives [2 way top] [4 way bottom]
• Chip Buckets (2 each)
• Extra Oil Filter
• Coupling Wrench & 3/8" Allen Wrench
• Integral Lifting Lug for instant portability

PII-88 Ironworker

Dual Operator

• Complete Punching Attachment with stripper
• 10 Punch and Die sets
• Front and rear 2 position joy stick controls (electric)
• Front and rear Remote Electric Foot Switches
• Front limit switch stroke control
• Set of Round Bar Knives [2 way] (customers choice to 1-1/2")
• Set of 20.625" Plate Shear Knives [4 way]
• Set of Blank Knives to extend shear to 24"
• Set of Coper Knives [2 way top] [4 way bottom]
• Set of Angle Shear Knives [8 way top] [4 way bottom]
• Chip Buckets (coper end)
• Extra Oil Filter
• Coupling Wrench
• Intergral Lifting Lug for instant portability

PII-140 Ironworker

Dual Operator Irownworker

• Complete Punching Attachment with stripper
• 10 Punch and Die sets
• Automatic Urethane Hold Down on the Plate, Angle, and Bar Shear
• Front and rear 2 position joy stick controls (electric)
• Front and rear Remote Electric Foot Switches
• Front limit switch stroke control
• Set of Round Bar Knives [2 way] (customers choice to 2")
• Set of 14.5" Plate Shear Knives [4 way]: For PII-110
• Set of 16.625" Plate Shear Knives [4 way]: For PII-140
• Set of 20.5" Plate Shear Knives [4 way] instead of Round Bar Knives and 16.625" Plate Shear
• Knives: For PII-140
• Extra Blank Knife to extend shear to 18" on PII-110 or 20.5" on PII-140
• Set of Coper Knives [2 way top] [4 way bottom]
• Set of Angle Shear Knives [2 way top] [4 way bottom]
• Chip Buckets (coper end)
• Extra Oil Filter
• Coupling Wrench
• Intergral Lifting Lug for instant portability

SEP-120 Punch Press

Single End Punch Press

• Complete Punching Attachment with stripper
• Electric Limit Switches for stroke control
• 10 Punch and Die set
• 5 Position joy stick control (electric) with jog up & down,fast up & down, neutral
• Remote Electric Foot Switch
• Coupling Wrench
• Integral Lifting Lug for instant portability
• Extra Oil Filter
• Remote Reservoir and Power Unit