Betenbender Hydraulic Press Brakes
|
||
Multi-Switch Control Panel (with emergency switch, run-job, and up-down buttons) and 3-position fully guarded switch
|
 |
Handwheel Control to .001 for Depth of Bend Adjustment
Ram Tilt Micrometer Pressure Gauge Control Panel Ram Machined With 1/2" or 3/4" Slot for Holding Dies Bed Machined 3/4" x 3/4" slot. (Die Riser Optional)
|
Whether you bend plastic or steel, there’s a Betenbender Hydraulic Press Brake to match your needs, ranging from the 17-ton model to the 350-ton. No matter the size, each machine features convenient operation for maximum output, ease of maintenance for maximum productivity.
Betenbender goes the extra mile to build a Press Brake that works hard, works accurately, and stays that way for years to come.
When your name goes on the finished product, so does your reputation. We feel the same way. Compare features. Compare results. You can count on first-class American technology, rugged durability, versatility and economy when it’s manufactured by Betenbender.
Use either a convenient multi-switch control panel or a 3-position fully guarded foot switch.
Accuracy:
Every Betenbender machine is thoroughly inspected and tested. Parallelism is maintained between bed and ram, or at a preset angle, by using precise automatic leveling controls. Parallelism is maintained at ± .002" in low speed.
The ram bottom reversal point is controlled by precise limit switches referenced off the bed. This isolates housing deflections which can interfere with accuracy.
The side situated handwheel sets the bottom limit of the ram stroke. Micrometer adjustment on the control end allows for tilting or paralleling of the ram. A bed referenced control monitors the actual distance between ram and bed, assuring repeatability independent of die wear or end plate deflection.
Versatility:
Betenbender’s press brakes have long, full tonnage stroke; adjustable length and selectable speed combinations; adjustable height for short stroke. A two-speed standard; three-speeds with infinitely adjustable low speed is optional. This option prevents sudden whip up of the work during bending operations.
Maintenance:
Clevis mounted cylinders eliminate cylinder binding by reducing the possibility of oil leaks. Pins and bushings do not rotate under load, resulting in much less wear than competitive products.
Easy Hydraulic System Maintenance:
The manifold assembly saves space and makes it easy to replace many components. The convenient work height makes the job easier.
Convenient Settings:
Readouts in increments of .001" allows recorded settings of closed heights.
Standard Components:
The control system components, micro switches, clamp-type backgauge, hydraulic fluid and filter cartridges are all standard equipment, making routine maintenance easier.
Flexibility:
2-speed ram is electrically controlled. It lets you shift to a lower speed before coming into contact with sheet metal.
Control:
The ram stops at the point of reference and self-levels at the bottom of every stroke. Main control cabinet enclosures are mounted in the right housing containing magnetic, non-reversing motor starter and 110/120 volt control circuit.
Safety and Reliability:
The control system operates at 110/120 volt using a minimum of circuitry. The system operates predominantly with American made electronics and American made motors.
Durability:
All-steel ends, rams and beds.
Electrical Equipment:
Meets requirements of NFPA79. It includes drip proof, continuous duty 45º C ambient hydraulic pump motor wired for 230 or 460 volt, 3 phase, 60 hertz.
Ram Level:
Is accomplished by two hydraulic systems. One for each cylinder, which keeps them parallel. Self-levels at bottom of each stroke even if hydraulic system is out of adjustment.
Sizes Available
17 Ton |
160 Ton |
50 Ton |
190 Ton |
70 Ton |
240 Ton |
95 Ton |
300 Ton |
120 Ton |
350 Ton |